Monday, December 8, 2014

Hand Power Tools, Part 3

Continuation of demo's and hands-on practice with:

1. Porter-Cable Single Speed Router


  • 15 Amp motor provides the power and durability necessary for the toughest applications
  • Single speed 21,000 rpm motor with soft-start feature to reduce torque at start-up
  • Auto-release collet system allows for easy bit removal after use
  • Precision machined aluminum motor housing and base
  • Dust-sealed switch and sealed ball bearing construction enhance tool durability
  • Base includes large integrated cast handles for enhanced stability and durability
2. Makita Power Planer

  • Powerful 7.5 AMP motor for improved performance
  • Two-blade cutter head with 16,000 RPM delivers smooth finish and fast stock removal
  • Lock-on button for continuous operation
  • V-groove on front shoe for easy chamfer cutting
  • Precision machined aluminum base for planing accuracy
  • Planes up to 4-3/8" wide and 1/16" deep in a single pass
  • Professional quality planer in small and compact design
  • All-ball bearing construction for longer tool life
  • Centerline balance with D-handle grip for easy operation
  • Double insulated

Milling Lumber

Today's lecture on Milling Lumber was given by Leigh. Leigh is one of my favorite instructors due to his practical experience working in the boatyards in Port Townsend. His approach is to explain the process for whatever we are doing but then to tell us how he would efficiently do it in the "real" world. In his discussion on Milling Lumber there are three comments that he made that are ones to remember for the future:

1. "You need to figure out first what you are trying to get out of this piece of wood before you do anything".
2. "Always keep the board as long as you can, for as long as you can".
3. "Decide if you are going to bring the piece of wood to the tool or the tool to the piece of wood".


Correction Milling
  • mill all the pieces of lumber at the same time
  • mill from the thickest board down to the thinnest
  • run all the material through first, then change the thickness
Rough sawn/live edge board
  • plane down to thickness
  • maybe join? or
  • draw a straight line (rip on bandsaw or skilsaw) then join on table saw

Saturday, December 6, 2014

Hand Power Tools, Part 2

On Friday we continued our education on power hand tools with a demo and hands-on practice with:

1. Makita 10" Dual Slide Compound Miter Saw, with Laser



  • 10" slide miter saw with the crown molding cutting capacity (6-5/8" nested) of a 12" miter saw
  • Exclusive 6 linear ball bearings engineered to deliver "dead-on" accurate cuts
  • Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (4-3/4")
  • Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts
  • Less weight (53.3 lbs.) and the most compact design in its class for easy jobsite portability
  • Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM
  • Increased capacity for up to 6-5/8" crown molding (vertically nested), 4-3/4" baseboard (vertical), and 12" crosscuts at 90°
  • Largest crown molding cutting capacity in its class
  • Miters 0°-52° left and 0°-60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, and 45° (left and right)
  • Soft start feature for smooth start-ups
  • Electronic speed control maintains constant speed under load for smoother, higher quality cutting
  • Exclusive 4-3/4" tall dual sliding fence system features upper and lower fence adjustments for more precise miter and bevel cuts
  • Built-in laser clearly indicates line-of-cut whether blade is turning or not; on-off switch and micro-adjustments for precise "left-of-blade" or "right-of-blade" cutting
2. Porter-Cable Laminate Trimmer


  • Durable 5.6 Amp, 30,000 rpm motor
  • Perfect for most trimming, small edge forming and hinge routing applications
  • Ergonomics allow for comfortable, single-handed control
  • Micro-set™ adjustment knob enables quick and accurate bit-depth setting
  • Spindle lock feature allows for single wrench bit changes
  • Precision cast aluminum base provides long-term durability
  • Dust-sealed switch and sealed ball bearing construction enhance tool durability
  • Fixed base design allows for excellent bit visibility
  • 1/4" collet

Thursday, December 4, 2014

Hand Power Tools, Part 1

Today we were introduced (finally) to some hand power tools to supplement the hand tools we have been working with so far this year. The focus of today's demo and practice was circular saws. We used three different types of circular saws that each serve their own purpose in the shop.

1. Skilsaw 7-1/4" Magnesium Worm Drive

Often called the saw that built America, the worm drive SKILSAW® has been on job sites since 1924. This newest MAG77 SKILSAW® is 2 lbs. lighter than the SHD77. It also has 15 A of power for optimal performance and an impact resistant carbide blade is included.
  • Powerful 15 Amp motor
  • Light magnesium housing (2 lbs. lighter*) reduces user fatigue
  • Impact resistant carbide blade for optimal use
  • Push button spindle lock for easy blade changes
2. Festool TS 55 Plunge Cut Track Circular Saw


The TS REQ is not your standard circular saw. With its accuracy and versatility, a better comparison would be to the most advanced table saws, miter saws or panel saws available. Add in its incredible portability and unbelievable ease of use, and you have a precision-cutting solution like no other, at home in the highest-end cabinet shop as well as an onsite remodel. With the addition of micro-adjustable depth controls and a flat housing for flush-cutting against walls or adjacent surfaces, the TS 55 REQ is our most advanced plunge cut saw ever, which is saying a lot.

  • When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
  • Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
  • Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
3. Porter-Cable 314 4-1/2" Trim Saw


Based on the classic, time-tested design, the Porter-Cable 314 4.5-amp 4-1/2-inch trim saw is ideal for siding, wood shake and shingles, roofing, remodeling, light framing, punch-out, shop work, flooring, repairs and home improvement. The Porter-Cable 314’s rugged worm gear and 4-1/2-inch blade cuts 1-15/16-inches at 90 degrees, and 1-1/16-inches at 45 degrees. Its 4.5-amps and 4,500 revolutions-per-minute deliver the power and cut speed to handle hardwood, plywood, and full 2-by-4s. The saw is 7 pounds, 11 inches long, and 6-1/4-inches tall.

Tuesday, December 2, 2014

Lofting 101

My last blog was on November 15 when we were preparing the shop floor for lofting. Since then we have worked continuously on lofting "The Sixteen" with the exception of the Thanksgiving break. I will attempt to describe what I have been doing without writing a short novel. To be honest I find lofting to be fun but lofting is also tedious, frustrating and at times just plain confusing (and why I have probably not blogged for two weeks). The good news is that other than some beginning projects that may relate to boatbuilding (rabbet, carlin, etc.) this is the start of real boatbuilding. Drafting and recreating the lines of the boat in full size on the lofting floor is only a fraction of the boatbuilding process. The process really begins to take form in creating developments and molds.

The lectures on lofting which have spanned several weeks now were given by the school's senior instructor and master boatbuilder. Jeff has been a boatbuilder for 30+ years and apprenticed under the school's founder, Bob Prothero. His experience and knowledge was further demonstrated in the fact that all of the instructors attended his lectures along with the students. One of the first things Jeff said when talking about boatbuilding is to “strive for perfection and settle for a little less”. I think this is great advice for someone new to boat building and maybe for life in general.


Some of the insight Jeff passed along in his discussion on lofting and boat building:
  1. Grid lines are actually planes. The line defines the boundary of the plane.
  2. Atkins plans have errors in the table of offsets (you have been forewarned).
  3. Waterlines, butt lines and diagonals are just tools to fair the body plan lines. Diagonals help square off the body plan. The body plan is the most important of all the lines because it gives shape to the hull. The body plans contain 85-90% of the useful information.
  4. The Sixteen is similar to a Herreshoff 12 ½.
  5. Fairing lines is similar to music but using your eyes instead of your ears.
Skeg built vs. Built down (what is done out here)
Built Down: constructed with the frames or hull bottom joining the keel in a plane nearly parallel with the sides of the keel, forming an S-curve from rail to keel.

Skeg Built: constructed with the frames or hull bottom joining the keel in a plane nearly perpendicular to the sides of the keel

Skeg built boats are said to be more stable with large loads, faster and generally lighter while built down boats are said to be stronger and more seakindly. Both sides argue that one is superior than the other.

Difference between East Coast and West Coast boatbuilding. In the East they use a steeper dead rise due to the higher modulation of the wave action.


Boatbuilding Methods
A. Lofting lines – Developments
B. Spiling – using cheap material to fit a piece
C. Scribing – transfer shape from one piece to another, directly on material, one direction only
D. Fitting

Developments
A. Bearding line – inside surface of planking where it enters the backbone.
B. Rabbet – outside of the planking.

 1. Stem section:
  - Partial development of new body plan line squared off from the rabbet
  - New plane with different orientation perpendicular to the rabbet
C. Mold reduction - the depiction of planking (constant thickness), framing (constant thickness) and longitudinals. Expansion from outside planking to the edge of mold.
 1. Deck Camber:
  - Use maximum beam width
  - Rise = 1/2” per 1-0-0 of beam (Herreshoff = 3/8”/Culler = 3”) rounded up
 2. Longitudals:
  - Taper to half of midships thickness to be able to bend.
  - Spar Taper – divide length into four equal parts
 3. Bevels:
  - Make a bevel stick = 2x station length (48”) from the master bevel board, square off on station and read bevel on next station
  - For Sta 4 move Sta 5 forward
  - For Sta 1 add Sta 0.5 and Sta 1.5 (changed station distance – need new bevel board)
  - For Sta 7 measure 2” aft of 7 to create Sta 7.2, develop new body plan line
  - Why the bevel stick works? Difference in breadth between diagonals is equal to the bevel angle.
  - Clear bevel board (Mylar) width = at very least the total maximum mold reduction, parallel edges and approximately 18” long and up to 30 degrees
  - Measure total mold reduction for Sta_ on clear bevel board and use to mark mold.
  - Deck Centerline - determine the bevel on mold (at notch) from the shelf
  - Loft shelf and clamp vs. Spilling
  - Top of apron = 1 ¼” above back rabbet
D. Transom (curved, raked)

The elusive but most important book related to lofting:


Ship and Aircraft Fairing and Development, for Draftsmen and Loftsmen and Sheet Metal Workers by Samuel Supplee Rabl

   

Yankee Tender

This is the boat we will be building as the final part of the first semester utilizing all the skills we have learned to date. Construction will start this week and finish prior to the Winter break. We will be using western red cedar as our primary material and will deviate from the plans in building only a single layer planked bottom. 

The “Yankee Tender” is a Wooden Boat Magazine refined design of the original “Thomson skiff-tender”, built from the early 1900’s to about 1935 by Cape Cod boatbuilder Asa Thomas of New Bedford, MA. It is known for it’s light weight, elegant lines, rowing ease, and sea worthiness as it was designed to handle the choppy waters of Buzzards Bay in Cape Cod, Massachusetts. It was used both as a skiff to get out on the water and fish out of, as well as being used as yacht tender.

The original “legendary” design by Asa Thomas was 10’ LOA with 3 strakes. Asa Thomas was known for his fine craftsmanship and exacting standards. Maynard Bray, Spencer Lincoln, Joel White and Jon Wilson, all of Wooden Boat magazine, teamed up and refined Thomas’s design and stretched it 12’-4” LOA, added a forth strake, and further raked the transom and the stem resulting a bigger boat, and more pleasing lines, yet it still rows with ease due to the rocker flat bottom

The boat is built primarily of cedar (strakes, thwarts, sternsheets), with an oak stem, transom, keel, rails and delicately tapered frames. The strakes are riveted together with copper nails and roves. All other fasteners and hardware is of silicon bronze. The chines and seat knees where steam-bent to shape. The outside is painted and the inside is oiled with a homemade varnish recipe called “boat soup” or “boat sauce”, an old down east deck coating formula consisting of a mixture of Boiled Linseed Oil, Turpentine, Pine Tar, and Japan Drier.

The boat rows with ease due to its rocker flat bottom which helps to keep the transom bottom out of the water, thus reducing drag. It will carry three adults. With one or three persons on board, the normal rowing position is the center thwart. With 2 persons on board, the rower sits on the forward thwart and the passenger sits on the sternsheets to keep the boat rocker balanced.

In Thomson’s day the 10’ skiff-tender complete with leathered oars cost $140 (not so cheap in those days) and he charged $1.25 per hour for his labor.


Petrel - 1928 42' Converted Salmon Troller

This is exactly the kind of boat I hope to have someday...

Petrel


This Pacific Northwest workboat conversion is enduring and endearing
Chris and Kathy Grace have owned other boats, but Petrel was the ideal choice for cruising the changeable waters of the Pacific Northwest.
Chris and Kathy Grace have owned other boats, but Petrel was the ideal choice for cruising the changeable waters of the Pacific Northwest.
It’s nearly a law of nature: A boat voyeur’s stroll through the Boat Haven in Port Townsend, Washington, stops on B-Dock. That’s where Petrel is tied up, and that’s where anyone, even folks who don’t know much about boats, pause to stare. She’s a converted salmon troller of modest size at 42 feet overall — a vessel so cute, so right, so honest, she’s like that perfect little boat a kindergartner might draw from imagination.


There’s the prominent bow with a massive, heavy-duty windlass that carries hundreds of feet of galvanized chain on the foredeck; the imposing trolling poles lashed astride her mast abaft the classic fishboat wheelhouse; a springy sheer line that is accentuated by a varnished caprail and a light gray rubbing strake; and a pinched stern that makes her a double-ender in the Scandinavian tradition. Conceived and built for the waters of the northeastern Pacific, Petrel is also in fine fettle despite her semibiblical age of 86 years.
She’s owned by Chris Grace, a retired commercial real estate developer who used her to cruise with his wife, Kathy, a nurse, on Puget Sound, in the San Juan and Gulf Islands and up to Desolation Sound in British Columbia. He calls Petrel the “center of our boating universe,” which is a statement of some import, given that they also owned and cruised a 39-foot Concordia yawl and raced an Etchells.
But in the end, Petrel, with her no-nonsense workboat qualities, proved to be the boat best suited for cruising these beautiful but challenging waters. They’re placid one moment and rough the next, churned by wind that runs counter to some rapacious currents. “Sailing is great, but it is easier and better to explore [these waters] while motoring,” Grace says. “Besides, we wanted to stay out longer than one month, and that’s just hard on a sailboat.”
OK, so power beats sail in this scenario. But why select a converted workboat with limited comforts and one that’s built of wood, to boot? “We didn’t do it for wood worship but because we wanted to be practical,” Grace explains. They looked at Grand Banks, Romsdal trawlers and a William Garden design, but Petrel got the nod, in part because her previous owner, who restored and converted her from a Pacific salmon troller into a cruising boat, refastened her Port Orford cedar planks with bronze. Another reason was her size. “When you think living quarters, you always want bigger,” Grace says. “But when you think about managing and maintaining a boat alone or with two, you want smaller, and 35 to 45 feet is ideal for a couple to handle.
“I wanted a boat that I can stare at when I row away from it in an anchorage,” Grace chuckles over a glass of single malt. “Like anything that’s been well designed and made, Petrel follows the Golden Rule. Take a Mustang P52 fighter plane or a Jaguar E-Type sports car. Really, what would you change? These are timeless designs that conform to the rules of aesthetics.”
It is doubtful that aesthetics played a leading role when the vessel was designed and built in 1928 in Astoria, Oregon, by Matt Tolonen at the Columbia Boat Building Co. Builders also were designers 
A drop-down chart table comes in handy near the helm.
A drop-down chart table comes in handy near the helm.
then, but that job was not as fancy as a yacht designer’s. “They made half models and later also drawings and [just] built boats,” says John Norgaard, a second-generation immigrant from Norway and a retired fisherman in the area, who learned the craft from his father. “A guy would come and say, ‘I want a boat like [this], only two feet longer and a foot wider,’ and that’s what he’d get.” Petrel’s first owner was Matt Sorvaag, a sailor by trade, also from Norway, who is said to have fished her until his death in 1950.

And fish, so goes the yarn, loved Petrel. Why that is, nobody really can explain. Perhaps they fancied a boat that slices through the water efficiently with a modest and clean wake; Petrel had the inside track with her pointy stern, which takes a page from the tradition of the Vikings. Key characteristics of Viking vessels were seaworthiness, speed and benign behavior in the difficult conditions Petrel might have found during her work life, crossing the treacherous bar of the Columbia River or on her far-ranging trips into the Gulf of Alaska.

“These boats were built to pack fish and take the weather, no matter where,” says Norgaard. “They had living quarters and fish holds that packed ice and were large enough to stay out for days at a time.” Later, he says, full sterns became common because boats had to carry more load. However, as a yacht, Petrel’s pointy end puts her in good company with designs by L. Francis Herreshoff, Bruce King and Ray Hunt or the seminal cruising boat of the 1970s, the Westsail 32, which is linked to Eric, designed by William Atkin in 1928, the year Petrel was built. Atkin, in turn, was influenced by the double-ended pilot boats designed by fellow Norwegian Colin Archer. Later, Bill Crealock and Bob Perry continued this school of thought with stout cruising boats, such as Pacific Seacrafts and Tayanas.


Life on board Petrel moves at a measured pace, between 7 and 8 knots. She’s been repowered a couple of times since her launch, when she was fitted with an Atlas Imperial 3-cylinder, 30-hp diesel. Now she’s propelled by a 100-hp 371 Detroit Diesel that will take about 2 gallons per hour for doing its job reliably and with a workboat soundtrack. It is installed under the wheelhouse and accessed through a hatch in the sole. The helm station is to port, but the large windows offer 270-degree visibility and an outward-opening door on each side. These provide quick access to the side decks — critically important while fishing for easy communication between skipper and crew, which consisted of one deckhand or maybe a couple of family members.
The accommodations are spare, but the lean beauty of Petrel is apparent in the details of her design.
The accommodations are spare, but the lean beauty of Petrel is apparent in the details of her design.
Accommodations are spartan but adequate. Access is a concession to Petrel’s workboat origin and requires climbing down steep ladders, either into the crew quarters in the bow, which consists of two bunk beds and a stand-up desk, or into the former fish hold aft, where the galley and dinette are located. The ladders and the lack of a dedicated saloon for lounging with water views, not to mention the absence of a bow thruster and joystick, are conspicuous differences between Petrel and other trawler yachts. The head and shower are “upstairs” in the wheelhouse, to port, abaft the steering stand. A neat workboat detail that Grace likes to demonstrate is the drop-down chart board, which is fastened to the overhead.

Grace doesn’t mind picking up sandpaper and a varnish brush or scraping the bottom when Petrel is hauled out. “He spent a ton of time upgrading the boat,” notes Ted Pike, the owner of Annie Too, a Bill Lapworth sloop, and a salesman for Edensaw, a wood supplier in the Pacific Northwest. “Her workboat layout might be a bit awkward for leisure, but she has a sweet motion that makes her comfortable underway.”

Stopping off Port Hadlock, Grace lowers Petrel’s impressive trolling poles 40 to 50 degrees and deploys stabilizers suspended from each pole to ride 10 to 15 feet below the surface, reducing the rolling motion. ”They increase the beam of the boat and its stability,” he says.


During fishing duty the stabilizers would be closer to the hull because several trolling lines would be rigged farther up on the poles, each set to different depths, weighed down by a “cannon ball” of lead and carrying several “spreads” with leader, lure and hook. Tag lines or inhauls would be run to the stern, where the trollerman would reel in the catch.
Petrel heads for bigger water, looking much as she always has, with stabilizing troller poles ready for action.
Petrel heads for bigger water, looking much as she always has, with stabilizing troller poles ready for action.
But those working days are long gone, although Petrel still carries a workboat permit. It comes in handy for jumping the line at the Ballard Locks in Seattle on the way to the Lake Union Wooden Boat Festival. She has been a fixture at such events and has won several awards for best conversion. But that’s just gravy because she’s cruising between 60 and 90 days a year, which means she’s a frequent guest in many places. And sometimes getting there is just as tough as it would have been getting battered in a gale with a hold full of fish or negotiating the bar. “I remember one rough trip to Friday Harbor,” Kathy says. “Chris was just climbing down into the forecabin with Bones [the couple’s Jack Russell terrier] under one arm, and just as he let go of the ladder we took a hit.” Without a hand for himself, he went flying and landed hard. The pooch was fine, but the skipper was dinged up. Nothing bad, but the incident and the bandage made for a good yarn at the dock. And Petrel? She kept calm and carried on, none the worse for wear.

Her name references a seabird in the southern latitudes that travels far to chase fish. Like these daring fliers, Petrel is highly adapted to her environment, with a form that follows function. But she also has a knack for finding owners who render the necessary care, which is why she’s still kicking after all these years. At the time of this writing, she was about to leave the Boat Haven in Port Townsend to move to Bainbridge Island, where her next owner plans to keep her. Though she won’t be trolling for salmon anymore, her conversion hasn’t diminished her character. She can still take what the ocean throws at her while pleasing connoisseurs and looky-loos alike with her traditional features and proportions. And don’t forget the kids, who will always draw boats like her when their fantasies are spilled on a plain sheet of paper.

Specifications
LOA: 42 feet
LWL: 38 feet 
BEAM: 12 feet 
Draft: 6 feet 
DISPLACEMENT: 26 tons 
TANKAGE: 550 gallons fuel, 300 gallons water 
PROPULSION: 100-hp 371 Detroit Diesel 
YEAR BUILT: 1928 
BUILDER: Matt Tolonen/Columbia Boat Building Co., Astoria, Oregon


December 2014 issue